1 rj-11 dimensions in inches (mm) rj adapters & cables bulletin no. drrj-c drawing no. lp0554 released 7/03 tel +1 (717) 767-6511 fax +1 (717) 764-0839 www.redlion-controls.com DRRJ11T6 and drrj45t8 connector to terminal adapters model description part number cbj cbl drrj rj-12 to rj-12 10' cable rj-45 to rj-45 6" jumper cable rj-45 to rj-45 10' cable rj-45 connector to terminal adapter rj-12 to rj-12 1' cable rj-45 parallel connector rj-11 to rj-11 6" jumper cable rj-45 to rj-45 1' cable rj-11/12 connector to terminal adapter cblrlc02 cblrlc07 cblrlc04 drrj45t8 cblrlc01 drrj45p6 cbj11bd5 cblrlc03 DRRJ11T6 ordering information application examples rs485 via rj-11 connector and DRRJ11T6 product examples: dlc, iams, itms, and pax. a red lion controls device with an rs485 rj-11 port is connected to the DRRJ11T6 adapter using the cbj11bd5 cable. the terminal block is then wired to run the rs485 modbus serial information to another device. a red lion controls device with an rs232 rj-12 port is connected to the DRRJ11T6 adapter using the cblrlc01 or cblrlc02 cable. the terminal block is then wired to run the rs232 serial information to another device. rs232 via rj-12 connector and DRRJ11T6 product examples: g3, modular controller, and paradigm (cl, cx, gl, tx, and vx) description these adapters convert modular rj-style connectors to terminal block connectors, providing a rugged means by which standard shielded cabling can be used in lieu of flat, unshielded cable. the DRRJ11T6 can be used with rj-11 or rj-12 cables, while the drrj45t8 can be used with rj-45 connectors. the adapters are designed to mount on any standard din rail. each screw-terminal accepts wire in size from 26 to 14 awg (0.14 to 2.5 mm solid; 0.14 to 1.5 mm stranded). terminal numbers for the screw-terminals correspond directly to the terminal pin out of the rj connector. there is an extra terminal on each block labeled ?s? for the connection of shields.
limited warranty the company warrants the products it manufactures against defects in materials and workmanship for a period limited to one year from the date of shipment, provided the products have been stored, handled, installed, and used under proper conditions. the company?s l iability under this limited warranty shall extend only to the repair or replacement of a defective product, at the company?s option. the company disclaims all liability for any affirmation, promise or representation with respect to the products. the customer agrees to hold red lion controls harmless from, defend, and indemnify rlc against damages, claims, and expenses ar ising out of subsequent sales of rlc products or products containing components manufactured by rlc and based upon personal injuries, deaths, property damage, lost profits, and other matters which buyer, its employees, or sub-contractors are or may be to any extent lia ble, including without limitation penalties imposed by the consumer product safety act (p.l. 92-573) and liability imposed upon any person pur suant to the magnuson-moss warranty act (p.l. 93-637), as now in effect or as amended hereafter. no warranties expressed or implied are created with respect to the company?s products except those expressly contained herein. the customer acknowledges the disclaimers and limitations contained herein and relies on no other warranties or affirmations. g3 operator panel connected to two modular controller masters. application example the 10' long cblrlc04 connects the g3, which is mounted on the door of the enclosure, to the drrj45p6, which is located on the din rail next to the modular controllers. the 1' long cblrlc03 cables are used to jumper from the drrj45p6 to the modular controllers. drrj45p6 - rj45 parallel connector dimensions in inches (mm) rs422/rs485/dh485 via rj-45 connector and drrj45t8 product examples: g3 and modular controller a red lion controls device with an rs422/rs485/dh485 port via rj-45 is connected to the drrj45t8 adapter using the cblrlc03 or cblrlc04 cable. the terminal block is then wired to run the rs422/rs485/dh485 serial information to another device. rj-45 dimensions in inches (mm) application examples description the drrj45p6 allows red lion products that utilize an rj45-rs485 port to be quickly multi-dropped, saving wiring time. all six of the connectors on the drrj45p6 are wired in parallel, allowing products such as the g3 operator panel and the modular controller to be easily connected for multi-drop applications.
|
